Fasteners

FOR IMMEDIATE ASSISTANCE CONTACT US AT SALES@COLVILLEFASTENERS.CA

Home / Industrial fasteners / screws / Multi-purpose & specialty fasteners / RSS™ JTS self tapping screws
 
RSS™ JTS self tapping  joint and truss RSS™ JTS self tapping
joint and truss
Message for new visitor Create an account
 

Our RSS™ JTS self tapping screws are used as a joint and truss fastener and are made of specialty hardened steel to provide high tensile, torque and shear strength. The sharp threads and points bite instantly into the material (including hardwood) thus reducing the splitting effect due to smaller shanks. 

Lengths 3-1/8" and longer have six CEE threads that enlarge the screw hole for the non-threaded portion of the fastener, allowing the wood to settle easily and increasing the screw's drawing strength. The CEE thread also reduces the friction on the screw shank which can result in lowering the driving torque and the liklihood of splitting the wood. The Zip-Tip™ is designed for fast starts in any fibrous nmaterials.

The round washer type head has no sharp edges like conventional lag screws. The added shoulder (nominal diameter) underneath the washer has the ability to centre the screw in pre-drilled hardware such as hinges and connector plates and may be used as an alternative to lag screws.  

The screws are Climatek™ coated and have been independently tested and approved for use in treated wood products. No pre-drilling is required except where building material limitations are specified. Stainless steel screws are recommended for tropical wood, cedar wood, pool, sauna and deck applications in areas with lage daily temperature variances.

Enter the exact quantity you require and we will do our best to accomodate you. Upon receipt of your inquiry, we will respond with our best price and delivery.

PART NO. NOMINAL SIZE METRIC SIZE MATERIAL FINISH ZIP-TIP FEATURE DRIVE BIT SIZE PRICE QTY REQ ACTION
GRKRSSJTS-2000 +14 x 3-3/8" M6.3 x 85 mm steel, hardened Cimatek coated™ yes six lobe (Torx) T-25 on application
GRKRSSJTS-3000 1/4 x 5" M6.3 x 127 mm steel, hardened Cimatek coated™ yes six lobe (Torx) T-25 on application
GRKRSSJTS-4000 1/4 x 6-3/4" M6.3 x 171 mm steel, hardened Cimatek coated™ yes six lobe (Torx) T-25 on application
 
Previous Page - 1 - Next